Champion Motors International is proud to present this 1999 Hummer H1 Wagon. This ONE OWNER Hummer has spent its entire life in PA, where it was maintained perfectly from new, with ONLY 7,759 miles. This particular vehicle has all the service records and tool bag. This vehicle is 1 of 831 produced in 1999.The beautifully kept Jet black exterior is nearly flawless with no imperfections that we have seen. The grey interior is like new also with no rips, tears or stains. The Hummer H1 was available in three major variants: a convertible-like soft top, a four-door hard top Sport Utility Truck and an "Alpha Wagon" body version. Less known variants were a two-door pickup truck and a four-door slantback, which shares the same body style of the Humvee employed by the U.S. Military. The convertible/soft top and the station wagon versions were the last types available to individual consumers.Under the hood is the monster 6.5 L Turbo Diesel mated to a 4 speed automatic transmission. The Hummer H1 shares some common driveline parts with the HMMWV. These include brakes, axles, frame and major body panels (hood, tailgate and quarter panels) are shared between the HMMWV and Hummer H1. All H1s and HMMWVs were produced on the same assembly line; of which civilian H1s were then painted and finished in a separate building opposite the parking lot.The H1 models are inherently stable due to their wide track. They can ford 30 inches (76 cm) of water and climb a 22-inch (56 cm) step. Their stock ground clearance of 16 inches (41 cm) is made possible by tucking driveline components inside a channel in the central space between the left and right seats. They have high approach/departure angles of 72/37.5 degrees. Most H1s are equipped with a Central Tire Inflation System(CTIS), which enables the driver to increase or decrease the tire air pressure at the push of a button, since lower tire pressures are more suited for off-road, and higher tire pressures are desirable on-road.The H1 features 16 inches (40 cm) of ground clearance as well as aggressive approach and departure angles, allowing it to clamber over a 22-inch (56 cm) high obstacle, handle a 60 percent grade and wade through up to 30 inches (76 cm) of water."[3]Hummer H1s have other unusual features, such as inboard brakes and portal gears that allow the drive trains half shafts a higher placement, for greater ground clearance. The radiator is up high, sloping over the engine on a forward-hinged hood. The air intake is high-mount, enabling the H1 to ford waist-level water. Rather than using simple run flat tires, magnesium-aluminum alloy or rubber inserts are an optional feature for run flat ability. *While every reasonable effort is made to ensure the accuracy of this information, we are not responsible for any errors or omissions contained on these pages. Please verify any information in question with Champion Motors International.
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)
)